GVAPO Tripinović – Founder, Nautical Armor Anodes
We deliver Operational Certainty.
The customer sent us three engine pencil anodes by FedEx.
That was all the technical documentation we received. Three physical samples.
Nothing else. No technical drawing, no chemical analysis. Nothing.
The request came from one of our US distributors. He wanted us to develop all three models for his product range, and he wanted two versions of each.
The first should follow the original construction: a zinc anode with a threaded brass component. The second should be a zinc-only alternative. The goal was to lower manufacturing cost and selling price while still meeting his intended application requirement.
Developing two versions of each model
So we started with the only reliable information we had in our hands: the samples themselves.
We measured them and had the materials analyzed to confirm the composition of the zinc and brass parts. Then came the technical drawings, production preparation and the first test pieces.
There was one practical complication. Developing one new model from a physical sample is one job. Developing two deliberately different solutions from that same starting point is another.
For the zinc-and-brass version, the sample defined the required construction and dimensions. For the zinc-only version, we had another task: develop a manufacturable alternative around the customer’s intended application and commercial goal.
Both versions were produced and checked. The customer approved them and ordered triple-digit test quantities of each model.
An unusually fast start to production
And this is the part I am particularly proud of:
Seven calendar days after the FedEx package reached us, mass production had started.
That is unusually fast for us. A custom development like this normally takes around 2–3 weeks. This time, the samples were clear, the decisions moved quickly, and our foundry got the development right without unnecessary rounds going backwards and forwards.
I would love to tell you we do this every week.
We do not. 😉
Practical choices from what you already have
But this case shows something I value much more than a brave promise about speed.
A customer does not always arrive with a finished technical package. Sometimes he has a drawing or a model code. Sometimes an old part. And sometimes he puts three small anodes in a FedEx envelope and says: can you make these?
That can be enough to start.
Our job is to turn that starting point into practical choices the customer can make. What can we develop from it? What could we improve? Which option makes more sense for the product range, application and target price?
Three samples arrived. Seven days later, production was running. Not our normal timeline. A very good week at Nautical Armor. 🙂
If you have a sacrificial anode you need developed, send us what you already have: a physical sample, drawing, measurements, photos or an existing reference.
Within a few days, we can normally come back with the practical options. Then you decide which solution makes the most sense for your market.
GVAPO Tripinović | Founder | Nautical Armor
We deliver Operational Certainty.